The Register shifting from left to right on both sides is called as

DIGITAL LOGIC DESIGN - REGISTERS AND MEMORY UNITS MCQ

• By default counters are incremented by
• The simplest registers only consists of
• Three decade counter would have
• A decimal counter has
• Memory that is called a read write memory is
• A register that is capable for shifting its binary information either to left or the Right side is called as
• Ripple counters are also called
• Transformation of information into registers is called
• Binary counter that count incrementally and decremently is called
• Shift registers having four bits will enable the shift control signal for
• A group of binary cells is called
• Synchronous counter is a type of
• BCD counter is also known as
• A 8bit flip-flop has
• Parallel load transfer is done in
• A counter with parallel load can be used to generate number of
• Ripple counter cannot be described by
• Time between the clock pulses are called
• Parallel loading is done with
• The word time signals can be generated by means of a counter that counts the required number of
• BCD counter counts from
• J=K=0 will make flip-flops
• Special type of registers are
• Flip-flops in registers are
• Down counter decrement the value by
• Register giving response to pulse duration is called
• 8bit information can be stored in
• PLA stands for
• Circular shift register is called
• Ripple counter is a type of
• MSI counter comes in two categories, one is Ripple counter and second is
• The Register shifting from left to right on both sides is called as
• Control variable of registers is also called
• Time to transfer the content of shift register is called
• Binary counter that count incrementally is called
• Register performing shift in one direction is called
• A group of flip-flop makes a
• Synchronous counters differ from asynchronous by
• Shift register can shift to
• Binary counter that count reversely is called
• ROM truth table is identical to the
• A BCD counter is a
• J=K=1 will make flip-flops
• A group of flip-flop sensitive to pulse duration is usually called as
• One binary cell contains information of
• Binary ripple counter is made up of
• Register that shift the information is called
• One bit transfer of the information at a time is called

This question belongs to these collections

• DIGITAL LOGIC DESIGN - REGISTERS AND MEMORY UNITS MCQ

Similar questions