DIGITAL LOGIC DESIGN - REGISTERS AND MEMORY UNITS MCQ
- By default counters are incremented by
- The simplest registers only consists of
- Three decade counter would have
- A decimal counter has
- Memory that is called a read write memory is
- A register that is capable for shifting its binary information either to left or the Right side is called as
- Ripple counters are also called
- Transformation of information into registers is called
- Binary counter that count incrementally and decremently is called
- Shift registers having four bits will enable the shift control signal for
- A group of binary cells is called
- Synchronous counter is a type of
- BCD counter is also known as
- A 8bit flip-flop has
- Parallel load transfer is done in
- A counter with parallel load can be used to generate number of
- Ripple counter cannot be described by
- Time between the clock pulses are called
- Parallel loading is done with
- The word time signals can be generated by means of a counter that counts the required number of
- BCD counter counts from
- J=K=0 will make flip-flops
- Special type of registers are
- Flip-flops in registers are
- Down counter decrement the value by
- Register giving response to pulse duration is called
- 8bit information can be stored in
- PLA stands for
- Circular shift register is called
- Ripple counter is a type of
- MSI counter comes in two categories, one is Ripple counter and second is
- The Register shifting from left to right on both sides is called as
- Control variable of registers is also called
- Time to transfer the content of shift register is called
- Binary counter that count incrementally is called
- Register performing shift in one direction is called
- A group of flip-flop makes a
- Synchronous counters differ from asynchronous by
- Shift register can shift to
- Binary counter that count reversely is called
- ROM truth table is identical to the
- A BCD counter is a
- J=K=1 will make flip-flops
- A group of flip-flop sensitive to pulse duration is usually called as
- One binary cell contains information of
- Binary ripple counter is made up of
- Register that shift the information is called
- One bit transfer of the information at a time is called
Electronics circuits
Communications
(d).programmable logic array
need an explanation for this answer? contact us directly to get an explanation for this answer